| GMC series longmen machining center parameters | ||
| type | unit | GMC4025 |
| journey | ||
| X-axis worship (left stone) | mm | 4000 |
| Y-axis stroke (front and rear) | mm | 2500 |
| Z axis stroke (top) | mm | 1000 |
| Distance n width between two columns | mm | 2500 |
| Distance from nose of spindle to workbench | mm | 105-1105 |
| principal axis | ||
| spindle taper | trpe | BT50 |
| The spindle forms | trpe | Belt/gear |
| speed of mainshaft | rpm | 6000 |
| Spindle motor power | kv | 22/26 |
| feed | ||
| X/Y fast feed | m/min | 10 |
| Z - axis fast forward | m/min | 10 |
| Cutting feed rate | m/min | 10-7000 |
| precision | ||
| Locate the orange execute | mm | ±0. 000/300 |
| repeatability | mm | ±0. 01 |
| workbench | ||
| Bench scale | mm | 4000*2100 |
| T-slot (wide X slot number X spacing) | mm | 28*9*220 |
| Table load | kg | 11000 |
| Automatic tool change (optional) | The knife arm type | |
| Automatic tool change quantity | pcs | 24 （32/60/90 apolegamy） |
| The most heavy broadsword | kgf | 15 |